What are the daily maintenance methods for fully anti-UV film?

1. In order to ensure that the car film and the glass are completely adhered after the film is applied, the car film cannot be cleaned and the defogging line switch cannot be turned on within a week. Try not to let the sun directly expose the glass, which will cause blistering. You should turn on the air conditioner in the car to allow air to circulate inside and outside. The breathability of the car film itself will form a natural solidification to ensure that the glue and the glass are completely combined after the car film is installed. , in order to form a safe and explosion-proof effect.
2. After applying the film, a little moisture will inevitably remain between the car film and the glass, which may cause small bubbles or slight ripples, resulting in blurred vision. This is normal. After being exposed to the sun, it will disappear naturally after 4 to 10 weeks. If the obvious phenomenon still exists after a period of time, be careful not to handle it without authorization. You should find a professional technician to handle it.
3. When cleaning the glass, it is forbidden to use solvents with high acidity and alkalinity for cleaning, and try not to let oily liquids such as leather oil get on the car film. You can use clean water or non-acidity and alkalinity cleaning fluids on the market. Most glass cleaners work well for cleaning car film. A more suitable cleaning solution for car films is a 10:1 dilution of water and household detergent.
4. The surface hardening of the car film is limited. To avoid scratching the car film, do not use any cleaning supplies with hard particles such as brushes and sandpaper. It is correct to use a soft cloth or sponge to clean the surface of the car film. Clean the cloth outside the car body, and do not use it to wipe the car film, because the cloth used outside the car body is easy to contain fine sand, which is also one of the factors that cause scratches on the car film.