What should you pay attention to after applying film to windows and doors?

1. Within the first three days following the installation of window glass film, avoid moving the glass as it may still contain water that has not evaporated completely. It is best not to disturb it during this period.
2. For the initial fifteen days after applying the glass film, refrain from using water to clean the film-covered glass surfaces.
3. Do not hang any items with adhesive or attach stickers or other decorations onto the glass film.
4. To clean the window film surface, lightly and evenly spray a cleaning agent. Then, gently wipe the film with a clean and soft cotton cloth or an absorbent wiping cloth. Cotton cloths and absorbent wiping cloths may need to be wrung out. Pure isopropyl alcohol applied to these cloths will quickly dissolve stubborn stains and greasy fingerprints. If stains persist, reapply the cleaning solution and use a soft rubber squeegee to wipe horizontally from top to bottom until dry. Use a towel to dry the edges of the window film.
5. If there is residual adhesive or glue left behind when removing adhesive tape or stickers from the window film on doors and windows, you can use a soft, clean cotton cloth dipped in acetone to gently clean the affected areas. This will quickly and completely remove any adhesive residue from the window film. A small amount of acetone will not harm the polyester film but will effectively dissolve and evaporate most adhesives and paints.
6. Do not use soft squeegees, brushes, or those containing abrasive materials.